Static route by serial ports

We have three routers that two of them connected directly by Serial port, goals in this project are as follows:
  1. Use classless IP address for each segment.
  2. Add static routes to each router.
  3. Configure Serial ports on Router1 and Router2.
  4. Test connectivity by Ping tool from each client in each segment.

[quotes_and_tips]

Davoud Teimouri

Davoud Teimouri is as a professional blogger, vExpert 2015/2016/2017/2018/2019, VCA, MCITP. This blog is started with simple posts and now, it has large following readers.

Leave a Reply

Your email address will not be published. Required fields are marked *